TX Star Construction handles the site work that comes before the building: clearing and grading, underground utilities, and the concrete that carries the load. One crew from raw dirt to final grade.
Keeping earthwork, utilities and concrete under one contractor means fewer handoffs, tighter schedules, and one point of contact when the plans change in the field.
Site preparation that gets the ground ready to build on, cut to plan and compacted to spec.
Structural and site concrete placed, finished and cured right the first time.
Underground systems installed, bedded and tested before anything goes on top.
From a single home site to a multi-acre commercial pad, the job gets the same planning and the same standard of work.
Site work happens in a set order. Here is what to expect from bid to closeout.
We review your civil plans and geotech report and return a line-item bid.
Permits checked, utilities located, SWPPP and erosion control in before dirt moves.
Clear, cut, fill and compact to plan elevations, with density tests along the way.
Water, sewer and storm laid, bedded, backfilled and tested before paving.
Forms, steel and pours for foundations, paving, curb and flatwork.
Final grade, cleanup, inspections and as-built information handed over.
We work to the numbers on your plans and the requirements of your city or utility district.
Fill placed in lifts and compacted to the density your plans and geotech call for.
Pads and paving set to plan elevations so water drains where it was designed to.
Placed to the specified strength, thickness and reinforcement, then properly cured.
Lines pressure-tested and inspected before backfill and before paving goes down.
Send the basics and we'll follow up. If you have civil plans or a geotech report, mention it and we'll ask for them.
